Skip to main content

WE LOVE FOOD!


From the top right down to the bottom we love our food.  As you can see here, Kayton is really enjoying her breakfast and juice.  I couldn't resist taking these cute pictures and sharing them with you.  By the time I got done she was done too.  I can just imagine what she was thinking maybe; " turn off the camera and do some work!"

Comments

Bryce and Candice Blood Family said…
I didn't bring the girls to see because they are in bed but I thoroughly enjoyed staring at your beautiful children and the cute little cousin too. Can't wait to see the pics from the weekend and someday we'll have internet more often so we can post current pics too! Why didn't we figure the blog thing out years ago!? Thanks again for taking the time to share.
March 14, 2008 at 11:01 PM
Post a Comment

Popular posts from this blog

How to get Urine/Sweat stains out of your Mattress

If you have kids you have pee stains I know it.  If you don't lucky you or you are a liar and in denial.  I have pee stains on more than one mattress.  I also have sweat stains on pillows because well I sweat a.lot .  It's a gift I know. I digress. Anyway I have tried many different ways to get urine/pee out of mattresses and I have been very unsuccessful so I did a google search and what do you know?  Another mom had pee stains too.  So I borrowed her recipe and it totally worked so I am sharing it with you. All you need are these few house-hold ingredients and a spray bottle.  I bought a really expensive one (NOT) I used one I had for my kids hair.  It worked great. You will need: 3 Tablespoons Baking Soda 8 ounces Hydrogen peroxide 1 drop dish soap Mix together well and use right away. My mom discovered that if it is not mixed well the baking soda will clog the sprayer.  You also can't store this apparently it doesn't last in the bottle and it is no longe
Read more

Wordless Wednesday

Go on over to 5MinutesforMom for more Wordless Wednesday posts and join in!!
19 comments
Read more

Master Bedroom Makeover Board and Batten

 I highly recommend a few items although you don't HAVE to have them it just makes this project go so much faster.  I bought a pancake compressor with three nail guns included saved me on this project and a miter saw.  I bought both from Home Depot and they didn't pay me to say that it is just where I happen to shop.  I actually had this all measured out and went to Home Depot and they cut the mdf primed boards for me.  However I later purchased the miter saw and was then able to cut things right here at my house.  The nail gun I used is a 16 gauge gun that can shoot nails up to 3 inches.  I used a 2.5 inch nail to cover the thickness of the board and wall. Ok so I recommend deciding how you want your boards spaced first and measure and mark on the wall where you want them.  I tried to do every 16 inches because that is how far apart my studs were but then I realized my wall wasn't an even length and so I have some that look a little off on the ends.  Lesson learned
Read more